4d-Micro-OLED-320-28-P1T 2.83" Active Matrix OLED Module with Touch screen

Description
The µOLED-3202X-P1 series are compact and cost effective all in one ‘SMART” display modules using the latest state of the art Active Matrix OLED (AMOLED) technology with an embedded PICASO-GFX graphics controller that delivers ‘stand-alone’ functionality to any project. The ‘easy to learn and use’ 4D Graphics Language (4DGL) with its vast built in library functions will allow rapid application development.

4DGL is a graphics oriented programming language, allowing the developer to write applications in a high level syntax similar to popular languages such as BASIC, C, Pascal and run it directly on the PICASO-GFX processor embedded in the µOLED-3202X-P1 modules.

4DGL allows the user to take complete control of all available resources on that hardware platform such as the Serial Port, Graphics AMOLED Display, µSD memory card, I/O pins, etc. This eliminates the need for an external host controller/processor to drive the µOLED-3202X-P1 modules via serial commands. It provides the user complete control over the hardware module allowing them to quickly develop powerful applications.

Features

The µOLED-3202X-P1 series of modules are aimed at being integrated into a variety of different applications via a wealth of features designed to facilitate any given functionality quickly and cost effectively and thus reduce ‘time to market’. These features are as follows:

There are 4 modules in the µOLED-3202X-P1 series:

        µOLED-32024-P1   : 2.4" non-touch
       µOLED-32024-P1T : 2.4" with-touch
        µOLED-32028-P1   : 2.83" non-touch
        µOLED-32028-P1T : 2.83" with-touch

QVGA 240 x RGB x 320 pixel resolution with 256, 65K or 262K true to life colours enhanced AMOLED screen.

Near 180 degree viewing angle.

All modules use the same controller board. PCB Size: 49.1 x 67.3 x 11.0mm.

Easy 5 pin user interface (VCC, TX, RX, GND, RESET) to any 4D micro-USB module such as µUSB-MB5 or the µUSB-CE5.

Voltage supply from 4.5V to 5.5V, current @ 90mA nominal when using a 5.0V supply source.

Onboard micro-SD (µSD) memory card adaptor with full FAT16 file support for storing and executing 4DGL programs, files, icons, images, animations, video clips and audio wave files. 64Mb to 2Gig µSD memory cards can be purchased separately.

Built in extensive 4DGL graphics and system library functions. For all available features and functions under the 4DGL programming language please visit the 4DGL web page.

2 x 30 pin headers for I/O expansion and future plug-in daughter boards.

Audio amplifier with a tiny 8-Ohms speaker for sound generation and wave file playback.

Mechanical support via mounting tabs which can be snapped off.

NOTE: Both the 2.4" and the 2.83" screens use the same controller board which is designed to the dimensions of the 2.83" display. The 2.4" display on the µOLED-32024-P1 and the µOLED-32024-P1T modules will appear smaller on the larger controller board.

If you have any questions on this product, please put your questions to the Support Mailing List and they will be answered there.

Please contact support AT 4dsystems.com.au if you have any questions at all, as Dontronics isn't in a position to answer any technical questions on this one.

If you need additional support on any of the above, and you can't find the information you need in the documentation, then please contact Atilla at the address below:

NOTE *** Australian Residents: If Applicable, 10% GST is added to the price, after you have logged in.