Some pictures below show the µVGA-PICASO-MD1 module mated with the µVGA-PICASO-MD1-UB motherboard.
Price is for the µVGA-PICASO-MD1 and the  µVGA-PICASO-MD1-UB motherboard together. Two boards.
Sorry, currently we don't sell these boards individually.

Product Features
The µVGA-PICASO-MD1 module is aimed at being integrated into a variety of different applications using a wealth of features designed to facilitate the designer  to quickly and cost effectively complete a product and thus reduce ‘time to market’. These features are as follows:
- Intelligent and fully integrated VGA/SVGA Display Graphics Controller.
- Tiny 28 pin module, powered by the 4D LABS PICASO chip. A powerful DSP/Controller based multi purpose graphics engine.
- Low Power design. 3.0Volts to 3.6Volts input supply @90ma.
- 256 Colours with standard resolution modes for QVGA (320x240), VGA (640x480) and SVGA (800x600, to be implemented in the near future). The µVGA-PICASO-MD1 supports multiple resolutions with in the same module. Resolutions are selectable during run time under host control. Resizable viewing window allows partial/full screen control.
- The digital video signals, RED0:RED2, GREEN0:GREEN2, BLUE1:BLUE2, HSYNC, VSYNC and BLANK(R,G,B), facilitate using a simple Resistor-DAC to drive any standard VGA monitor.
- 512K bytes of onboard SRAM for video memory allows 8 pages for QVGA, 2 pages for VGA and 1 page for SVGA resolutions. Utilising the multiple pages allows double buffering which can be used for smooth animations and windowing of menu systems.
- RX and TX signals (TTL levels) provide a simple serial host interface. The serial interface allow the µVGA-PICASO-MD1 graphics module to be connected to any host controller such as a PIC, AVR, STAMP, ARM, Propeller just to name a few as well as a PC. The host controls the module by sending simple serial commands. Auto baud rate detection from 2400 baud to 1Mbit/sec.
- Powerful, easy to use and understand built in graphics functions allow drawing of lines, rectangles, circles, ellipses, text, images, icons, user defined bitmaps and much more…
- SPI signals (SDI, SDO, SCK) allow the module to be connected to a number of SD and MMC memory cards (from 64Mb up to 4Gb) that can store images, icons, and other graphics objects.
- Future upgrades and enhancements are easily achieved by uploading PmmC (Personality module micro Code) files. PmmC files allow the PICASO chip to be uploaded with the latest micro-Code firmware.
- System designers can incorporate the µVGA-PICASO-MD1 module directly into their application, saving space and cost. Reference designs enable the user to create a platform to incorporate the µVGA-PICASO easily.

NOTE: Usable pixels are; QVGA: 310x210, VGA: 620x420 and SVGA: 800x560. These resolutions are chosen to maximise the number of display pages from the video RAM.

Full Product Files
 

If you have any questions on this product, please put your questions to the Support Mailing List and they will be answered there.

If you need additional support on any of the above, and you can't find the information you need in the documentation, then please contact Atilla at the address below:

Back To Top
 

Details
Shipped From	Dontronics Tullamarine Australia
Shipping:	Add During Checkout
Aust GST	Payable By Australian Residents
Manufacturer	4DSystems (RRP $84USD)
Price:	AUD$82.62 (USD$ 71.40) (€uro 52.18)

NOTE *** Australian Residents: If Applicable, 10% GST is added to the price, after you have logged in.

2 Item(s) In Stock 

Options
Quantity	1 2
Quantity :  5-9 Items  10-49 Items  50-99 Items  100+ Items  Price:  AUD$78.49 AUD$74.36 AUD$72.29 AUD$70.23 Price:  USD$ 67.83 USD$ 64.26 USD$ 62.48 USD$ 60.69 Price:  €uro 49.57 €uro 46.96 €uro 45.66 €uro 44.36  Add to cart