Prices
| Support | Download
OLED-128
Companion
Products:
OLED-128
uOLED-128-BREAKOUT
4D
Systems USB-5V Kit. This kit adapts this product to our Micro-USB
very easily.
Micro-USB-Mb
A variation on the Micro-USB
module.
Associated
Products:
uLCD-128
uLCD-160
uOLED-96
uOLED-128
What
is an OLED? | Customer
feed back on OLED
Product
Overview:
The
OLED-128 is a 1.5” 128x128 colour OLED display. This OLED is the same display
used in the microOLED range of modules. It allows a very cost effective
means of adding a full colour small display to any product or your next
microcontroller project. Schematics and sample initialisation code are
also available upon purchase.
Main
Features:
-
128 x 128 1.5” 262K true to life colours
-
SSD1339 Driver IC (Data Sheet available)
-
30 pins on LCD FPC, 0.5mm pitch
-
Dimensions: 36mm x 36mm x 1.6mm
-
2.4 to 3.6 Volts supply, nominal 3.3 Volts
-
No backlighting
| Pin |
Name |
Description |
| 1,30 |
NC |
Not
Used |
| 2,29 |
VCC |
OLED
High Voltage Supply pin, 0-16 Volts, nominal 13 Volts. |
| 3 |
VCOMH |
Voltage
output for high level for COM signals. |
| 4 |
VDDIO |
Supply
pin for I/O pins. Connect to VDD. |
| 5 |
VSL |
Segment
Voltage Reference pin. |
| 6-14 |
D8-D0 |
OLED
Data, connects to host micro 8/9 bit data bus or port. |
| 15 |
E(RD#) |
68XX
type micro E signal or 80XX type micro RD# signal. |
| 16 |
R/W#(WR#) |
68XX
type micro R/W# signal or 80XX type micro WR# signal. |
| 17-18 |
BS1,BS2 |
MCU
interface select. |
| 19 |
CS# |
OLED
Chip Select, Active Low. |
| 20 |
D/C# |
Data/Command,
High = Display Data, Low = Command Data |
| 21 |
RESET# |
Reset
Signal, Initialises the OLED when Low (Active Low) |
| 22 |
IREF |
Current
Reference for Brightness Adjustment. |
| 23,24,25 |
VPC,
VPB,VPA |
Pre-charge
Reference Voltage Signals. |
| 26 |
VBREF |
Voltage
Reference for DC/DC converter. |
| 27 |
VDD |
Supply
pin for Logic Circuits. |
| 28 |
GND |
Ground |
Software
Download:
Full
Product Files
Support:
If
you have any questions on this product, please put your questions to the
Support
Mailing List and they will be answered there.
Please
contact atilla at 4dsystems.com.au if you have any questions at
all, as Dontronics isn't in a position to answer any technical questions
on this one.
If
you need additional support on any of the above, and you can't find the
information you need in the documentation, then please contact Atilla at
the address below:
This
product is from: 4dsystems.com.au
atilla
at 4dsystems.com.au
Back
To Top
