Prices
| Support | Download
OLED-160-Display
Available
Options:
uUSB-MB5
(USB to Serial)
uSD-64MB
(memory card)
uSD-256MB
(memory card)
Related
Products:
GOLDELOX-MD1
(Tiny Universal 28 pin OLED-LCD control module)
What
is an OLED? | Customer
feed back on OLED
Product
Overview:
The
OLED-160 is a 1.69” 160x128 full colour OLED display. This OLED is the
same display used in the micro-OLED (uOLED-160) range of intelligent modules.
It allows for a very cost effective means of adding a full colour small
display to any product or your next microcontroller project. Schematics
and sample initialisation code are also available upon purchase.
Main
Features:
-160
x 128 1.69” 262K true to life colours
-SEPS525
Driver IC (Data Sheet available)
-35
pins on LCD FPC, 0.5mm pitch
-Dimensions:
39.9mm x 34mm x 1.8mm
-2.4
to 3.6 Volts supply, nominal 3.3 Volts
-No
backlighting required
| Pin |
Name |
Description |
| 1,
35 |
NC |
Not
Used |
| 31 |
VDD |
Supply
pin for Logic Circuits. |
| 2,4,30,32,34 |
GND |
Ground |
| 3,33 |
VDDH |
OLED
High Voltage Supply pin, 0-15 Volts, nominal 13 Volts. |
| 8 |
VDDIO |
Supply
pin for I/O pins. Connect to VDD |
| 16-24 |
D17-D9 |
OLED
Data Bus, to host micro 8/9 bit port. Unused pin to GND. |
| 27 |
E(RD#) |
68XX
type micro E signal or 80XX type micro RD# signal. |
| 28 |
R/W#(WR#) |
68XX
type micro R/W# signal or 80XX type micro WR# signal. |
| 14 |
CPU |
CPU
Type. Low = 68XX, High = 80XX |
| 15 |
PS |
Parallel/Serial.
Low = Serial, High = Parallel |
| 26 |
CS# |
OLED
Chip Select, Active Low. |
| 25 |
RS |
Data/Command,
High = Display Data, Low = Command Data |
| 29 |
RESET# |
Reset
Signal, Initialises the OLED when Low (Active Low) |
| 5 |
IREF |
Current
Reference for Brightness. Tie 68K resistor to GND. |
| 7 |
OSCA1 |
Oscillator
pins. Tie 10K resistor between these 2 pins. |
| 6 |
OSCA2 |
|
| 9 |
VSYNCO |
Vertical
Sync Output (RGB Mode) |
| 10 |
VSYNC |
Vertical
Sync Input (RGB Mode) |
| 11 |
HSYNC |
Horizontal
Sync Input (RGB Mode) |
| 12 |
DOTCLK |
Dot
Clock Input (RGB Mode) |
| 13 |
ENABLE |
Video
Enable Input (RGB Mode) |
Software
Download:
Full
Product Files
4dSystems
Applications YouTube
Support:
If
you have any questions on this product, please put your questions to the
Support
Mailing List and they will be answered there.
Please
contact atilla AT 4dsystems.com.au if you have any questions at
all, as Dontronics isn't in a position to answer any technical questions
on this one.
If
you need additional support on any of the above, and you can't find the
information you need in the documentation, then please contact Atilla at
the address below:
This
product is from: 4dsystems.com.au
atilla
AT 4dsystems.com.au
Back
To Top
