These products will reduce in price by 5% every month until they either
sell out completely, or reach -90% off.
Prices
| Support
4D
Systems USB-5V Kit.
The
USB-5V Kit is designed for the following two applications:
-
Provide
+5Volts to your projects via either the 4 male or 4 female header pins.
You must solder a standard PCB mount
B USB connector to the USB-5V module. The signals for pins 1 through
4 on the module are connected straight through, with 5V and ground provided
via the B connector. Maximum current is 500ma.
-
Add
USB to your project. You must solder a
PoUSB12
to the USB-5V module.
USB-5V
is a kit of parts that can be soldered together in minutes, and consists
of the following:
PCB
1K
resistor
4
pin male header vertical
4
pin female header right angle
Tri
colour LED
B
USB Connector
All
packaged in a small plastic bag
The
LED is a tri-color LED. This has been done so that it can't be soldered
in the wrong way. In fact, the unused half of the LED is actually used
to monitor the TX line.
We
supply a B USB connector with
the kit, but you must purchase a PoUSB12
if you require one.
We
supply a B USB connector with
the kit, but you must purchase a PoUSB12
if you require one.
USB
B Connector:
PoUSB12:
Signal
Names:
| Pin
Number |
5V
Supply |
USB |
| 1 |
+5
Volts |
+5
Volts |
| 2 |
Not
Used |
TX |
| 3 |
Not
Used |
RX |
| 4 |
Ground |
Ground |
Support:
1)
Do you need additional support on this product?
2)
You can't find the information you need in the documentation?
3)
You need product download links?
4)
Any questions not covered in the above list?
Then
please click here.
Back
To Top
