The
XBee - USB Board has been designed to allow easy and reliable connection
between the Xbee's modules and PC. XBee and XBeePRO modules are fully supported,
even the new XBee Series 2 is supported (but not tested yet).
The
rock solid construction, the soft start circuitry and the high power voltage
regulator; ensure the maximum reliability and full performances of the
XBee module.
Four
useful LEDs allow constant monitoring of the board activity and fast troubleshooting.
A Features Connector provides the most important connections with the XBee
module and the USB chip adding great flexibility to this board.
The
USB Mini B connector ensures a compact and easy to use board.
Technical
Specifications:
XBee
Modules: XBee and XBeePRO are fully supported. XBee Series 2 are also supported
(but not tested yet)
USB
Port: a powered (500mA) USB 1.0/2.0 port is required.
3.3V
OUT - Output Power: depends on the Xbee module used. About 300mA available
with XBee, and 140mA with XBeePRO modules.
Dimensions:
52 x 35 mm - max height 7 mm without XBee
Features:
RSSI
and ASSOCIATE LEDs to monitor Xbee activity
TX
and RX LEDs to monitor serial activity between the Xbee module and the
USB chip
3.3V
OUT to power external devices (MCU’s, boards, etc)
Soft
Start circuitry to maximize reliability
Feature
Connector to access the most important XBee and USB connections
Software
Download:
Datasheet
(1.6MB)
LINK
FTDI Website (FT232R)
Support:
If
you need additional support on the above product, and you can't find the
information you need in the documentation, then please contact support
at the address below:
This
product is from: Droids SAS
http://www.droids.it/
luigi
AT robot-italy.com
Mr.
Luigi Carnevale
Back
To Top
