Prices
| Support | Download
The
XB Board has been designed to allow an easy and reliable connection between
the Xbee’s modules and your application. XBee and XBeePRO modules are fully
supported.
The
rock solid construction and the high power voltage regulator ensure
the maximum reliability and full performances of the XBee module.
Two
useful LEDs allow constant monitoring of the board activity and fast troubleshooting.
All the pins of the XBee are routed out.
You
can connect the Board in several methods.The SMD pads allows fast wire
or SMD component soldering. Better than a Breadboard, faster than a perfboard!
You can stack as many boards as your circuit grow up, no limits! The side
connectors are useful for routing signals or data outside the board.
Note:
XBee
module not included
Technical
specifications
-
XBee,
Xbee Pro, Xbee series 2 supported
-
3.3V Output
power: about 300mA available with XBee and about 140mA with XBee PRO
-
RSSI (Received
Signal Strength Indicator) and Associate Leds to monitor XBee activity
-
RoHS
compliant
The
pads pitch is standard 2,54mm - The mounting holes are 3.2mm diameter.
Dimensions: 43 x 68mm.
Board
Layout
Red
lines shows the pad connections
Documentation
Datasheet
(132Kb)
Support:
If
you need additional support on the above product, and you can't find the
information you need in the documentation, then please contact support
at the address below:
This
product is from: Droids SAS
http://www.droids.it/
luigi
AT robot-italy.com
Mr.
Luigi Carnevale
Back
To Top
