| Result pages: |
1
|
2 |
 |
See details
|
ACS712 Breakout
Cat No: SF-BOB-08882
This is a breakout board for the fully integrated Hall Effect based linear ACS712 current sensor. The sensor gives precise current measurement for both AC and DC signals.
Our price: AUD$13.08 (USD$ 11.94) (€uro 8.72)
NOTE *** Australian Residents: If Applicable, 10% GST is added to the price, after you have logged in.
13 Items In Stock
|
|
See details
|
AVR-ISP-CONV
Cat No: AVR-ISP-CONV
Some programmers have 6 pins, others 10pin. Some boards have 6 pins, and some boards has 10 pins. You can convert in any direction.
Our price: AUD$2.62 (USD$ 2.39) (€uro 1.75)
NOTE *** Australian Residents: If Applicable, 10% GST is added to the price, after you have logged in.
141 Items In Stock
|
|
See details
|
Breakout Board CF Compact Flash Cards - Full
Cat No: SF-BOB-00195
Full breakout board for CompactFlash devices. The boards come fully assembled with socket and PCB without headers. Solder on your own type of connector/orientation for your specific application.
Our price: AUD$26.22 (USD$ 23.94) (€uro 17.49)
NOTE *** Australian Residents: If Applicable, 10% GST is added to the price, after you have logged in.
10 Items In Stock
|
|
See details
|
Breakout Board CF Compact Flash Cards - Slim
Cat No: SF-BOB-00493
Slim breakout board for CompactFlash devices. This board comes fully assembled with socket and PCB without headers. Solder on your own type of connector/orientation for your specific application.
Our price: AUD$26.22 (USD$ 23.94) (€uro 17.49)
NOTE *** Australian Residents: If Applicable, 10% GST is added to the price, after you have logged in.
9 Item(s) In Stock
|
|
See details
|
Breakout Board for CP2102 USB to Serial
Cat No: SF-BOB-00198
Breakout board for Silicon Laboratories' CP2102 USB to Serial IC
Our price: AUD$28.85 (USD$ 26.34) (€uro 19.24)
NOTE *** Australian Residents: If Applicable, 10% GST is added to the price, after you have logged in.
10 Items In Stock
|
|
See details
|
Breakout Board for CP2103 USB to Serial w/ GPIOs
Cat No: SF-BOB-00199
Basic breakout board for the new Silicon Laboratories' CP2103 USB to Serial IC.
Our price: AUD$28.85 (USD$ 26.34) (€uro 19.24)
NOTE *** Australian Residents: If Applicable, 10% GST is added to the price, after you have logged in.
9 Item(s) In Stock
|
|
See details
|
Breakout Board for Electret Microphone
Cat No: SF-BOB-08669
Ready to add audio to your next project? This small breakout board couples a small electret microphone with a 100x opamp to amplify the sounds of voice, door knocks, etc loud enough to be picked up by a microcontrollers Analog to Digital converter.
Our price: AUD$10.45 (USD$ 9.54) (€uro 6.97)
NOTE *** Australian Residents: If Applicable, 10% GST is added to the price, after you have logged in.
8 Item(s) In Stock
|
|
See details
|
Breakout Board for FT232RL USB to Serial
Cat No: SF-BOB-00718
Basic breakout board for FTDI's popular USB to UART IC. Now with internal oscillator and EEPROM, the FT232RL is an impressive IC!
Our price: AUD$19.65 (USD$ 17.94) (€uro 13.10)
NOTE *** Australian Residents: If Applicable, 10% GST is added to the price, after you have logged in.
18 Items In Stock
|
|
See details
|
Breakout Board for microSD Transflash
Cat No: SF-BOB-00544
Breakout board for the microSD socket that is not much bigger than your fingernail. Compatible with the SPI interface found on any SD card, this tiny form factor was created for cell phone storage and is perfect for your next MP3 project! Board comes fully assembled and tested.
Our price: AUD$19.65 (USD$ 17.94) (€uro 13.10)
NOTE *** Australian Residents: If Applicable, 10% GST is added to the price, after you have logged in.
10 Items In Stock
|
|
See details
|
Breakout Board for RJ45
Cat No: SF-BOB-00716
This is a small PCB that brings out the pins of the RJ45 connector to an in-line 0.1" footprint. Use with break-away headers for breakboarding or create your own RJ45 cable
Our price: AUD$2.56 (USD$ 2.34) (€uro 1.71)
NOTE *** Australian Residents: If Applicable, 10% GST is added to the price, after you have logged in.
20 Items In Stock
|
|
See details
|
Breakout Board for SIM Cards
Cat No: SF-BOB-00573
This is a full 6-pin breakout for the SIM socket allowing direct access to SIM communication.
Our price: AUD$19.65 (USD$ 17.94) (€uro 13.10)
NOTE *** Australian Residents: If Applicable, 10% GST is added to the price, after you have logged in.
10 Items In Stock
|
|
See details
|
Breakout Board for USB miniB
Cat No: SF-BOB-08401
We have no idea what USB device you are hooking up to, but if you need to add a miniUSB/USB miniB connector to your breadboard - here it is. Also good for an un-regulated, non-limited 5V supply up to 100mA.
Our price: AUD$2.56 (USD$ 2.34) (€uro 1.71)
NOTE *** Australian Residents: If Applicable, 10% GST is added to the price, after you have logged in.
68 Items In Stock
|
|
See details
|
Breakout for MAX7456 On Screen Display
Cat No: SF-BOB-09168
This is a breakout board for the Maxim MAX7456 monochrome on-screen display chip. The board is set up with all supporting circuitry and RCA connectors to allow the user to easily interrupt and overlay text and/or graphics onto a video signal (PAL or NTSC).
Our price: AUD$52.51 (USD$ 47.94) (€uro 35.02)
NOTE *** Australian Residents: If Applicable, 10% GST is added to the price, after you have logged in.
10 Items In Stock
|
|
See details
|
CONV-10
Cat No: CONV-10
Simply moves 2*5 to 1*10, same here, schools use it for e.g. taking signals from the 10pin connectors on STK500 to a wireless board.
Our price: AUD$2.62 (USD$ 2.39) (€uro 1.75)
NOTE *** Australian Residents: If Applicable, 10% GST is added to the price, after you have logged in.
74 Items In Stock
|
|
See details
|
CONV-16
Cat No: CONV-16
Simply moves 2*8 to 1*16, could be for JTAG for ARM, could be from a standard 2*16 LCD to get from 1*16 to a flat cable.
Our price: AUD$2.62 (USD$ 2.39) (€uro 1.75)
NOTE *** Australian Residents: If Applicable, 10% GST is added to the price, after you have logged in.
59 Items In Stock
|
|
|
|
Default
