Prices
| Support
VMUSIC
Module - easily add USB Flash Drive interface and Audio Playback to products.
VMUSIC
is a product that not only lets you add USB Flash drive interfacing to
your product but allows you to play back MP3 and other popular digital
music formats direct from a USB Flash drive. Extensions to the VDAP
command set allow you to play a selected file as well as control the volume,
balance, etc. of the sound channel and monitor the status of the file being
played. VMUSIC is ideal for adding MP3 playback from USB drive capability
to home entertainment and in-car audio systems, as well as other appliances
requiring audio playback capability from USB Flash drives.
Key
VMUSIC2 features include:
- Uses
FTDI's VNC1L device coupled with VLSI VS1003 IC for music playback
-
One USB "A" socket to connect to USB Flash drive
-
Audio line-out connector for audio playback
-
Stereo 3.5mm headphone jack socket and audio line-out connector for audio
playback
-
Only 4 signals to connect excluding PWR/GND
-
Jumper selectable UART or SPI interface
-
2mm (0.0.8") pitch 8-pin connector
-
Single 5V supply input
-
Traffic indicator LED
-
Uses extended VDAP command set
-
Program or update firmware via USB Flash disk or via UART interface
-
VNC1L firmware programming control pins PROG# and RESET# brought out onto
internal jumper interface
-
VMUSIC2 is a Pb-free, RoHS compliant development module
Support:
If
you need additional support on the above product, please contact FTDI at
the addresses below:
gordon.lunn
at ftdichip.com
Andrew
Armstrong support4 at ftdichip.com
These
products are from: FTDI
http://www.ftdichip.com
E-Mail
(Support): vinculum.support AT ftdichip.com
And
all Documents can be found at: http://www.vinculum.com/documents.html
Back
To Top
