Prices
| Support| Download
USB
hub powered, modular relay control board.
-
Relays
(4 x): 5 Amp 30VDC, 5Amp 250V AC
-
Sealed
omron mechanical relays.
-
Command-line
application.
-
Standard
FTDI USB module (dlls for most OSs)
-
Power
on LED, relay indicator LEDs
* USB
cable not included.
The
super4 USB relay board is driven over USB directly (not virtual com port).
Each board is uniquely identified via its' serial number string, this can
be changed using TCTECs RelayMapper application, making replacement of
boards easy and programming simple to understand.
Enclosure
suggestions:
For
indoor low voltage applications, The Super4 fits inside Jaycar cat: JP6011
A sealed
polycarbonate enclosure in an appliance control application.
Using
20mm (22 mm hole) cable gland for the USB plug (fits a type-B plug). Use
cable glands of required size for other wiring (example shows 1 for input
cable and 1 for output cable).
All
glands facing down for water proofing and drainage. Board is tacked in
place with silicone, after USB is plugged in and relays wired.
16-Aug-2008
Roy
Wright
Asheboro
Fire Department
United
States
I am
wanting to sound alarms for secondary dispatch(911 calls). We receive call
information through email and will use Microsoft Outlook to make a rule
to print the message and activate a relay through usb(an idea) to sound
external alarms through-out the fire stations. Does this sound like it
will work with the Super4 USB Relay Module, if so, how difficult will it
be to setup programming? |
| The
Microsoft outlook rule can be set to 'start application', if the email
meets the specified criteria.
The
application that is started can be a batch file called 'sound_alarm.bat'
with the following line in it:
c:\program
files\tctec\relayset.exe -salarm,01 -t10000
The
above example will switch on relay one, of the relay board called 'alarm'
for 10 seconds.
In
this case, relayset.exe is located in C:\program files\tctec\
I tested
this example on Microsoft outlook 2007.
Let
me know if I can help further.
Regards,
Richard
van Wyk
TCTEC
Pty LTd |
Software
Download:
User
Manual (pdf)
Super4
USB Relay Windows Software
Super4
USB Relay Linux Software
Software
Usage Map
Support:
If
you need additional support on the above product, and you can't find the
information you need in the documentation, then please contact support
at the address below:
This
product is from: TCTEC Pty Ltd
sales
AT emx.net.au
Richard
van Wyk
Back
To Top
