| Result pages: |
1
|
2 |
 |
See details
|
ACS712 Breakout
Cat No: SF-BOB-08882
This is a breakout board for the fully integrated Hall Effect based linear ACS712 current sensor. The sensor gives precise current measurement for both AC and DC signals.
Our price: AUD$12.26 (USD$ 11.94) (€uro 9.32)
NOTE *** Australian Residents: If Applicable, 10% GST is added to the price, after you have logged in.
5 Item(s) In Stock
|
|
See details
|
Breakout Board CF Compact Flash Cards - Full
Cat No: SF-BOB-00195
Full breakout board for CompactFlash devices. The boards come fully assembled with socket and PCB without headers. Solder on your own type of connector/orientation for your specific application.
Our price: AUD$24.59 (USD$ 23.94) (€uro 18.69)
NOTE *** Australian Residents: If Applicable, 10% GST is added to the price, after you have logged in.
10 Items In Stock
|
|
See details
|
Breakout Board CF Compact Flash Cards - Slim
Cat No: SF-BOB-00493
Slim breakout board for CompactFlash devices. This board comes fully assembled with socket and PCB without headers. Solder on your own type of connector/orientation for your specific application.
Our price: AUD$24.59 (USD$ 23.94) (€uro 18.69)
NOTE *** Australian Residents: If Applicable, 10% GST is added to the price, after you have logged in.
5 Item(s) In Stock
|
|
See details
|
Breakout Board for CP2102 USB to Serial
Cat No: SF-BOB-00198
Breakout board for Silicon Laboratories' CP2102 USB to Serial IC
Our price: AUD$27.05 (USD$ 26.34) (€uro 20.56)
NOTE *** Australian Residents: If Applicable, 10% GST is added to the price, after you have logged in.
7 Item(s) In Stock
|
|
See details
|
Breakout Board for CP2103 USB to Serial w/ GPIOs
Cat No: SF-BOB-00199
Basic breakout board for the new Silicon Laboratories' CP2103 USB to Serial IC.
Our price: AUD$27.05 (USD$ 26.34) (€uro 20.56)
NOTE *** Australian Residents: If Applicable, 10% GST is added to the price, after you have logged in.
5 Item(s) In Stock
|
|
See details
|
Breakout Board for Electret Microphone MkII
Cat No: SF-BOB-09964
Ready to add audio to your next project? This small breakout board couples a small electret microphone with a 100x opamp to amplify the sounds of voice, door knocks, etc loud enough to be picked up by a microcontroller's Analog to Digital converter. Unit comes fully assembled as shown. Works from...
Our price: AUD$9.80 (USD$ 9.54) (€uro 7.45)
NOTE *** Australian Residents: If Applicable, 10% GST is added to the price, after you have logged in.
13 Items In Stock
|
|
See details
|
Breakout Board for FT232RL USB to Serial
Cat No: SF-BOB-00718
Basic breakout board for FTDI's popular USB to UART IC. Now with internal oscillator and EEPROM, the FT232RL is an impressive IC!
Our price: AUD$18.42 (USD$ 17.94) (€uro 14.00)
NOTE *** Australian Residents: If Applicable, 10% GST is added to the price, after you have logged in.
19 Items In Stock
|
|
See details
|
Breakout Board for microSD Transflash
Cat No: SF-BOB-00544
Breakout board for the microSD socket that is not much bigger than your fingernail. Compatible with the SPI interface found on any SD card, this tiny form factor was created for cell phone storage and is perfect for your next MP3 project! Board comes fully assembled and tested.
Our price: AUD$18.42 (USD$ 17.94) (€uro 14.00)
NOTE *** Australian Residents: If Applicable, 10% GST is added to the price, after you have logged in.
Out of Stock 
Click on Red Button for stock explanation.
|
|
See details
|
Breakout Board for RJ45
Cat No: SF-BOB-00716
This is a small PCB that brings out the pins of the RJ45 connector to an in-line 0.1" footprint. Use with break-away headers for breakboarding or create your own RJ45 cable
Our price: AUD$2.40 (USD$ 2.34) (€uro 1.82)
NOTE *** Australian Residents: If Applicable, 10% GST is added to the price, after you have logged in.
Out of Stock
Click on Red Button for stock explanation.
|
|
See details
|
Breakout Board for SIM Cards
Cat No: SF-BOB-00573
This is a full 6-pin breakout for the SIM socket allowing direct access to SIM communication.
Our price: AUD$18.42 (USD$ 17.94) (€uro 14.00)
NOTE *** Australian Residents: If Applicable, 10% GST is added to the price, after you have logged in.
10 Items In Stock
|
|
See details
|
Breakout Board for USB miniB
Cat No: SF-BOB-08401
We have no idea what USB device you are hooking up to, but if you need to add a miniUSB/USB miniB connector to your breadboard - here it is. Also good for an un-regulated, non-limited 5V supply up to 100mA.
Our price: AUD$2.40 (USD$ 2.34) (€uro 1.82)
NOTE *** Australian Residents: If Applicable, 10% GST is added to the price, after you have logged in.
58 Items In Stock
|
|
See details
|
Breakout for MAX7456 On Screen Display
Cat No: SF-BOB-09168
This is a breakout board for the Maxim MAX7456 monochrome on-screen display chip. The board is set up with all supporting circuitry and RCA connectors to allow the user to easily interrupt and overlay text and/or graphics onto a video signal (PAL or NTSC).
Our price: AUD$49.23 (USD$ 47.94) (€uro 37.42)
NOTE *** Australian Residents: If Applicable, 10% GST is added to the price, after you have logged in.
2 Item(s) In Stock
|
|
See details
|
Logic Level Converter
Cat No: SF-BOB-08745
If you've ever tried to connect a 3.3V device to a 5V system, you know what a challenge it can be. The SparkFun logic level converter is a small device that safely steps down 5V signals to 3.3V and steps up 3.3V to 5V.
Our price: AUD$2.40 (USD$ 2.34) (€uro 1.82)
NOTE *** Australian Residents: If Applicable, 10% GST is added to the price, after you have logged in.
3 Item(s) In Stock
|
|
See details
|
Real Time Clock Module
Cat No: SF-BOB-00099
This a custom designed module for the DS1307 Real Time Clock. The module comes fully assembled and pre-programmed with the current time (ok, so it's our current time - MST).
Our price: AUD$24.59 (USD$ 23.94) (€uro 18.69)
NOTE *** Australian Residents: If Applicable, 10% GST is added to the price, after you have logged in.
8 Item(s) In Stock
|
|
See details
|
SOIC to DIP Adapter 20-Pin
Cat No: SF-BOB-00495
Low-cost basic SOIC break out boards. These are custom PCB boards that interface standard SOIC devices to standard .1" headers.
Our price: AUD$4.87 (USD$ 4.74) (€uro 3.70)
NOTE *** Australian Residents: If Applicable, 10% GST is added to the price, after you have logged in.
14 Items In Stock
|
|
See details
|
SOIC to DIP Adapter 28-Pin
Cat No: SF-BOB-00496
Low-cost basic SOIC break out boards. These are custom PCB boards that interface standard SOIC devices to standard .1" headers.
Our price: AUD$4.87 (USD$ 4.74) (€uro 3.70)
NOTE *** Australian Residents: If Applicable, 10% GST is added to the price, after you have logged in.
12 Items In Stock
|
|
See details
|
SOIC to DIP Adapter 8-Pin
Cat No: SF-BOB-00494
Your basic SOIC break out boards. What's the difference? The 8 Pin board is TINY. And you can't beat the price! These are custom PCB boards that interface standard JEDEC SOIC devices to standard .1" headers.
Our price: AUD$3.64 (USD$ 3.54) (€uro 2.77)
NOTE *** Australian Residents: If Applicable, 10% GST is added to the price, after you have logged in.
Out of Stock
Click on Red Button for stock explanation.
|
|
See details
|
SOT23 to DIP Adapter
Cat No: SF-BOB-00717
6 pin SOT-23 to DIP adaptor. Created to take SOT23 of various pin sizes breakout to DIP. This will work with 3-pin MOSFETs, BJTs, Voltage Regulators (SOT-23-5), and various other Micro6, Micro5, etc packages.
Our price: AUD$1.17 (USD$ 1.14) (€uro 0.89)
NOTE *** Australian Residents: If Applicable, 10% GST is added to the price, after you have logged in.
1 Item(s) In Stock
|
|
See details
|
SSOP to DIP Adapter 16-Pin
Cat No: SF-BOB-00498
Your basic SOIC break out boards. What's the difference? The 8 Pin board is TINY. And you can't beat the price! These are custom PCB boards that interface standard JEDEC SOIC devices to standard .1" headers.
Our price: AUD$3.64 (USD$ 3.54) (€uro 2.77)
NOTE *** Australian Residents: If Applicable, 10% GST is added to the price, after you have logged in.
3 Item(s) In Stock
|
|
See details
|
SSOP to DIP Adapter 20-Pin
Cat No: SF-BOB-00499
8, 16, 20, and 28-Pin SSOP to DIP break out boards. The footprint was rotated to accommodate different width SSOP devices and can be used with any pin count up to 28 pins. Designed to be used with 0.65mm pitch devices but can also be used with 0.025" pitch devices (comes out to ~0.635mm).
Our price: AUD$4.87 (USD$ 4.74) (€uro 3.70)
NOTE *** Australian Residents: If Applicable, 10% GST is added to the price, after you have logged in.
16 Items In Stock
|
|
See details
|
SSOP to DIP Adapter 28-Pin
Cat No: SF-BOB-00500
8, 16, 20, and 28-Pin SSOP to DIP break out boards. The footprint was rotated to accommodate different width SSOP devices and can be used with any pin count up to 28 pins. Designed to be used with 0.65mm pitch devices but can also be used with 0.025" pitch devices (comes out to ~0.635mm).
Our price: AUD$4.87 (USD$ 4.74) (€uro 3.70)
NOTE *** Australian Residents: If Applicable, 10% GST is added to the price, after you have logged in.
4 Item(s) In Stock
|
|
|
|
Default
