Prices
| Support | Download
Please
note the prices for the different CAN-REports vary greatly here. Please
view individual prices at the bottom of this product
page for variations.
Overview
The
CAN-Analyzer CAN-REport is an efficient and versatile tool for analysis
and commissioning of CAN-based networks according CAN 2.0A and 2.0B, like
CANopen
and DeviceNet.
The
built-in scripting capability allows to use it universally at development
and test of CAN devices besides the normal possibilities of displaying
the received CAN messages. It is especially useful in the field of industrial
CAN networking.
The
separation of hardware-interface (CAN access) and visualization software
allows the usage in TCP/IP networks.
Description
In
the standard equipment the CAN-REport already has a lot of efficient basic
functions like different modes of online observation of the bus traffic,
transmission of unique or cyclic CAN messages, trigger inclusive pre- and
post-trigger logging as well as the recording of CAN messages and storing
it to log files belong to this purpose. Log files can be loaded again and
interpreted with activated extensions.
The
analyzer CAN-REport consists of the CAN hardware interface and the visualization
software. Both are connected as server and client by a standard TCP/IP
network connection. This separation allows to use the CAN interface as
a remote interface, ie. both parts can be located at different computer
systems. Remote monitoring of CAN networks is possible without additional
or modified software over LAN, dial or internet connections.
How
you receive the Software Licence:
You
must download the Demo software, and purchase a Licence file. With the
licence file the demo versions of our tools become full versions.
Products
Available
CAN
Analyzer CAN-Report
A
powerful CAN message and protocol analyzer/recorder useable with different
CAN-interfaces. This development and service tool aids an engineer to
observe, record and analyse communication protocols on CAN bus (http://www.can-cia.org/can)
at a logical level. The analyzer distinguishes itself by its programability
and ability to work with different hardware interfaces.
http://www.can-cia.org/index.php?id=170
CANopen
extension module for CAN-REport
Specialized
to interpret CAN messages of the higher layer CAN protocol (HLP)
http://www.can-cia.org/index.php?id=17
DeviceNet
extension module for CAN-REport
Specialized
to interpret CAN messages of the higher layer CAN protocol (HLP)
http://www.can-cia.org/index.php?id=18
J1939
extension module for CAN-REport
Specialized
to interpret CAN messages of the higher layer CAN protocol (HLP) J1939
http://www.can-cia.org/index.php?id=177
CAN-REport
Redundancy Extension
The
Redundancy Extension allows monitoring of two CAN bus lines simultaneously.
Software
Download:
For
further detailed information on this product please visit the Port
Website here
Download
CAN-REport
Support:
If
you need additional support on the above product, and you can't find the
information you need in the documentation, then please contact support
at the address below:
This
product is from: Port
http://www.port.de
oe
AT port.de
Back
To Top
