is a very small blue dongle that plugs into any PC COM Port, or any other
RS232 port in an embedded system and gives an instant CAN connectivity.
This means it can be treated by software as a standard COM Port (serial
RS232 port) which eliminates the need for any extra drivers. Sending and
receiving can be done in standard ASCII format.
68mm, Width: 31mm, Height: 16mm.
module plugs directly into a standard serial port and provides a standard
DB9 male output to CAN systems according to CiA (CAN in Automation) recommendations.
It is powered with 8-15VDC through the CAN connector with ESD protection
and reveresed power. It consumes max 100mA, but normally not more than
40mA (this depends on BUS load and eventual CAN cable errors etc.). Use
your own RS232 LIB/drivers (in e.g. Visual Basic, Deplhi, C++ etc.).
assignement according to CiA recommendations DS102-1.
CAN232 is powered with +Vin (9-15VDC) at pin 9 and GND at pin 3.
picture above shows how to connect the CAN232.
Do you need additional support on this product?
You can't find the information you need in the documentation?
You need product download links?
Any questions not covered in the above list?
please click here.