are three very cheap products from my good friend Lars at LAWICEL, that
may be of great assistance for use with ARM/AVR programmers:
simple. Some programmers have 6 pins, others 10pin. Some boards have 6
pins, and some boards has 10 pins. You can convert in any direction. Also
what many schools like is that the ISP signals also go out to a 1 row 6pin
ISP header, which could be used to stick into solderless wireboards etc.
Some prefer to experiment that way with an Atmel AVR.
moves 2*5 to 1*10, same here, schools use it for e.g. taking signals from
the 10pin connectors on STK500 to a wireless board. Simple. Or 10pin JTAG
moves 2*8 to 1*16, could be for JTAG for ARM, could be from a standard
2*16 LCD to get from 1*16 to a flat cable. I know a lot of customers soldering
these flat cables direct on the LCD, very time consuming. Here you do it
course many customers will come up with more uses for these boards.
Do you need additional support on this product?
You can't find the information you need in the documentation?
You need product download links?
Any questions not covered in the above list?
please click here.