Prices
| Support | Overview
DT2xx:
Is
an add-on board for any of the above. Usually has the I/O application,
but can be a mini tool as well for a SimmStick or any other product.
These
prices are for bare boards only.
Currently
we have:
DT201:
One Inch Prototype board.
DT202:
Two Inch Prototype board.
DT203:
24 LEDs, 4/8 switches on a SimmStick platform. 2" module. Uses 1 to 3 ULN2803's,
4 momentary switches, 8 link selected switches.
DT204:
Expansion board for SimmStick Bus. 2" Module.
1)
Can be used just to add 4 slots to a bus. The bus continues through.
2)
Used as a right angle or left angle bus connection, so that you can have
a SimmStick facing up or down, or both.
3)
Signal Isolation and cross connection using either links or DIP switches.
4)
Convert Simm connector to 30 pin Female.
DT205:
Relay board for 4 relays. Carries a partial bus on to the next module so
that a total of 16 relays could be used by cascading four boards. Uses
SimmStick bus signals D0 to D15. Can select a group of 4 bits by placement
of a single ULN2803 (or 2003) in one of four positions. 4 monitor LEDs.
Screw terminals for outputs. Suits many Relay types. DT205 is a 2.5 Inch
Board. For more information on the DT205 click
here
DT207
One Inch SimmStick Power Supply and RS-232 Comms.
For
more information on the DT207 click
here
DT208
SimmStick Adapter Board. This will allow you to convert "Fat" boards into
the SimmStick standard thickness very easily.
DT209
I/O Expansion Board on a SimmStick This board utilizes three I2C bus expansion
integrated circuits to provide a total of 24 expansion lines.
Support:
If
you need additional support on the above products, the SimmStick group
should be able to assist you.
Mailing
List - SimmStick
SimmStick
Overview
http://www.dontronics-shop.com/
Back
To Top
