We have plenty of stock of these cables which are guaranteed to run the very latest version of FTDI drivers.
See: TTL-232R-5V TTL-232R-5V-AJ TTL-232R-3V3 TTL-232R-3V3-AJ
See Also: TTL-232R-5V-Buggy TTL-232R-3V3-Buggy TTL-232R-3V3-AJ-Buggy
Product: 16881 This product is the 5 Volt Version
Prices | Support | Upgraded your Operating System?
See also TTL-232R-3V3-AJ
If for any reason there is no Voltage label on the cable, then the above pictures show you how to identify them. The plastic inside the connector housing will be black for 3.3 Volts, and white for 5 Volts.
You can also test the voltage by plugging the unit into a USB port and measuring the voltage between Ground and any data pin.
Need a TTL-232R-5V-WE or a TTL-232R-3V3-WE cable? All Audio Jack type cables have 6 colour coded wires inside, so all you need to do is cut the AJ connector off, and strip the sheathing back to the required length.
See the color coded table at: http://www.dontronics-shop.com/files/d_2299.jpg
The TTL-232R-AJ ("audio jack") is a USB to Serial (TTL level) converter cable which allows for a simple way to connect TTL serial interface devices to USB. This version of FTDI's USB to TTL serial adapter cable uses a 3.5mm audio jack on the serial interface and has it's I/O pins configured to operate at 5V levels.
The TTL-232R-AJ uses a FT232RQ device which is housed inside the USB 'A' connector, and is terminated at the end of a 1.8 m (70") cable with a 3.5 mm audio jack which provides access to transmit (Tx), receive (Rx), and GND signals.
The TTL-232R-AJ is fully RoHS compliant and is supplied loose packed in an anti-static bag. It is FCC and CE approved.
NOTE Windows 7 and 8 Users:
If you simply plug in the FTDI device, you should find that the drivers will auto-install.
You will find the drivers for all other systems at: http://www.ftdichip.com/Drivers/VCP.htm This includes Windows 8, and all other Windows Versions, Linux, Mac OS X, Windows CE. See the above URL address for full version information.
How to Program a PICaxe with any FTDI cable
Current suitable FTDI FT232Rx 5V Cables, and boards stocked:
FTDI MM232R module
FTDI UM232R module
SF-DEV-09115 FTDI Basic Breakout - 5V
SF-BOB-00718 Breakout Board for FT232RL USB to Serial
990002 XBee USB Board
990004 XBee USB to Serial Micro Converter
1) Do you need additional support on this product?
2) You can't find the information you need in the documentation?
3) You have upgraded your operating system, and the current software doesn't cover it?
4) You need the driver software?
5) You need a list of the Operating Systems this product will operate with? (Covers virtually everything).
6) Any questions not covered in the above list?
Then please click here.
Back To Top
This product is the 5 Volt Version