Prices
| Support | Upgraded your Operating
System?
The
UM232R module is a USB - Serial UART (TTL) development module for the FT232R
IC device. The UM232R is supplied on a PCB designed to fit a 24 pin DIP
socket, and provides access to all UART and CBUS interface pins of the
FT232R device.
The
UM232R can be configured as either USB bus-powered or self-powered and
also supports 5V or 3V level interface IOs via two sets of jumper setting
pins. Full hardware handshaking is supported and the UM232R can communicate
at up to 3MBaud at TTL/CMOS levels.
Ideal
for rapid prototyping and development of FT232R designs, an attractive
quantity discount structure also makes this module suitable for incorporation
into low/medium volume finished product designs.
The
UM232R plugs into a standard 24-pin 0.6in wide DIP socket.
UM232R
Datasheet
VCP
Drivers
D2XX
Drivers
How
to Program a PICaxe with any FTDI cable
Current
suitable FTDI FT232Rx 5V Cables, and boards stocked:
FTDI:
TTL-232R-5V-AJ
TTL-232R-5V
FTDI
MM232R module
FTDI
UM232R module
SparkFun:
SF-DEV-09115
FTDI Basic Breakout - 5V
SF-BOB-00718
Breakout Board for FT232RL USB to Serial
Droids:
990002
XBee USB Board
990004
XBee USB to Serial Micro Converter
4dSystems:
4d-Micro-USB-CE5
Support:
1)
Do you need additional support on this product?
2)
You can't find the information you need in the documentation?
3)
You have upgraded your operating system, and the current software doesn't
cover it?
4)
You need the driver software?
5)
You need a list of the Operating Systems this product will operate with?
(Covers virtually everything).
6)
Any questions not covered in the above list?
Then
please click here.
Back
To Top
