We have plenty of stock of these cables which are guaranteed to run the very latest version of FTDI drivers.
See: TTL-232R-5V TTL-232R-5V-AJ TTL-232R-3V3 TTL-232R-3V3-AJ
See Also: TTL-232R-5V-Buggy TTL-232R-3V3-Buggy TTL-232R-3V3-AJ-Buggy
Product: 16493 This product is the 5 Volt Version
Prices | Support | Upgraded your Operating System?
See also TTL-232R-3V3
Need a TTL-232R-5V-WE? Just cut the connector off this one.
If for any reason there is no Voltage label on the cable, then the above pictures show you how to identify them. The plastic inside the connector housing will be black for 3.3 Volts, and white for 5 Volts.
You can also test the voltage by plugging the unit into a USB port and measuring the voltage between Ground and any data pin.
External Product links to this page:
How to connect a laptop to a subaru.
THE EQMOD PROJECT EQDIRECT VENDORS:
An alternative to the EQDIR from shoestring (cheaper & neater)
Instructions to build an interface to flash the 2002-2007 Busa ECU
NOTE Windows 7 and 8 Users:
If you simply plug in the FTDI device, you should find that the drivers will auto-install.
You will find the drivers for all other systems at: http://www.ftdichip.com/Drivers/VCP.htm This includes Windows 8, and all other Windows Versions, Linux, Mac OS X, Windows CE. See the above URL address for full version information.
The TTL-232R is a USB to Serial (TTL level) converter cable which allows for a simple way to connect TTL interface devices to USB.
The TTL-232R uses a FT232RQ device which is housed inside the USB 'A' connector, and is terminated at the end of a 1.8 meter cable with a 0.1" pitch header socket which provided access to transmit (Tx), receive (Rx), RTS#, CTS#, Vcc (5V), and GND.
The TTL-232R is fully RoHS compliant and is supplied loose packed in an anti-static bag. It is FCC and CE approved.
Re: USB/Serial cable for EQMOD/ASCOM software and Skywatcher NEQ6Pro mount
Hi Don All good - thanks! I have successfully used your cable to connect my Win 7 laptop to my Skywatcher EQ6Pro mount.
All I needed to do was replace the 6-way header plug with a DB9 male plug.
I connected the Black lead to DB9 pins 4 & 5, The Orange lead to pin 6 and the Yellow lead to pin 9.
It works perfectly! You may even wish to include that info on the TTL-232R-5V USB converter page?
Thanks and kind regards JOHN COOPER
How to Program a PICaxe with any FTDI cable
Current suitable FTDI FT232Rx 5V Cables, and boards stocked:
FTDI MM232R module
FTDI UM232R module
990004 XBee USB to Serial Micro Converter
1) Do you need additional support on this product?
2) You can't find the information you need in the documentation?
3) You have upgraded your operating system, and the current software doesn't cover it?
4) You need the driver software?
5) You need a list of the Operating Systems this product will operate with? (Covers virtually everything).
6) Any questions not covered in the above list?
Then please click here.
Back To Top
This product is the 5 Volt Version