Prices | Support

FEATURES:

MCU: LPC2129 16/32 bit ARM7TDMI-S™ with 256K Bytes Program Flash, 16K Bytes RAM, RTC,4x 10 bit ADC 2.44 uS, 2x CAN, 2x UARTs, I2C, SPI, 2x 32bit TIMERS, 7x CCR, 6x PWM, WDT, 5V tolerant I/O, up to 60MHz operation

standard JTAG connector with ARM 2x10 pin layout for programming/debugging with ARM-JTAG

three on board voltage regulators 1.8V, 3.3V and 5V with up to 800mA current

single power supply: +7-9VDC required

power supply status LED

power supply filtering capacitor

two channel RS232 interface with two RS232 SUB-D 9 pin connectors

two channel CAN interface with drivers and two SUB-D 9 pin connectors

iButton interface circuit

Frequency input connector

two buttons

two status LEDs

Potentiometer connected to AIN

RESET circuit with exterman control of Philips ISP utility via RS232

RESET button

DBG jumper for JTAG enable

BSL jumper for bootloader enable

JRST jumper for enable/disable external RESET vontrol by RS232

10 Mhz crystal

extension headers for all uC ports

PCB: FR-4, 1.5 mm (0,062"), green soldermask, white silkscreen component print

Dimensions: 115x80 mm (4.5x3.2")

DOCUMENTS:

LPC-P2129.chm 

HARDWARE:

LPC-P212x schematic REV-B

SOFTWARE:

RS232 initialization demo code 

Blink LED demo code 

RapidiTTy Lite development IDE from TTE Systems example with LPC-P2129 and ARM-USB-OCD 

OpenOCD + Eclipse set of projects 1.00 include flash write make file for LPC-P2129. The complete list of projects included is here. 

Support:

1) Do you need additional support on this product?
2) You can't find the information you need in the documentation?
3) You wish to know what is included in the package?
4) The download links on this product page aren't working correctly?
5) Any questions not covered in the above list?

Then please click here.

Back To Top