INTRODUCTION:
The
ARM Cortex-M3 processor is the latest generation of ARM processors for
embedded systems. It has been developed to provide a low-cost platform
that meets the needs of MCU implementation, with a reduced pin count and
low-power consumption, while delivering outstanding computational performance
and an advanced system response to interrupts. The ARM Cortex-M3 32-bit
RISC processor features exceptional code-efficiency, delivering the high-performance
expected from an ARM core in the memory size usually associated with 8-
and 16-bit devices.
The
STM32F103 Performance Line family has an embedded ARM core and is therefore
compatible with all ARM tools and software. It combines the high performance
ARM Cortex-M3 CPU with an extensive range of peripheral functions and enhanced
I/O capabilities. STM32-H103 is low cost development board for the new
ST Cortex-M3 based microcontrollers STM32F103RBT6. This board is perfect
solution for USB peripherials development. All microcontroller ports are
available on extension connectors.
FEATURES:
* MCU: STM32F103RBT6 ARM 32 bit CORTEX M3™ with 128K Bytes Program Flash,
20K Bytes RAM, USB, CAN, x2 I2C, x2 ADC 12 bit, x3 UART, x2 SPI, x3 TIMERS,
up to 72Mhz operation
* standard JTAG connector with ARM 2x10 pin layout for programming/debugging
with ARM-JTAG
* USB connector
* user button
* RESET button
* status LED
* power supply LED
* on board voltage regulator 3.3V with up to 800mA current
single power supply: takes power from USB port or extension connector pin
* 8 Mhz crystal oscillator
* 32768 Hz crystal and RTC backup battery connector
* extension headers for all uC ports
* PCB: FR-4, 1.5 mm (0,062"), soldermask, silkscreen component print
* Dimensions: 61x 34mm (2.4 x 1.3")
* Distance between the exntension connectors: 25.4 mm (1")
DOCUMENTS:
* STM32-H103.pdf
- users manual
HARDWARE:
* STM32-H103
schematic
* JTAG connector
(top view)
SOFTWARE:
* Blinking LED (C source and HEX) for EW-ARM 5.11
* Sample mouse driver (C source and HEX) for EW-ARM 5.11
* Blinking
LED project for GCC + Eclipse + OpenOCD
ORDERING
CODES:
STM32-H103
- assembled and tested board, includes STM32F103RBT6 microcontroller
Support:
If
you need additional support on the above product, and you can't find the
information you need in the documentation, then please contact support
at the address below:
Support
Forum:
http://www.sparkfun.com/cgi-bin/phpbb/index.php
This
product is from: OLIMEX Ltd
http://www.olimex.com
info
AT olimex.com
Mr.
Tsvetan Usunov
Back
To Top
