| Support | Lost CD or Upgraded your
must be placed via the Shopping Cart, unless
prior arrangements have been made for special orders.
includes Government, and Educational orders.
USB2-F-6001 provides a simple method of adapting legacy serial devices
with RS422 interfaces to modern USB ports. This is accomplished by
incorporating the industry standard FTDI FT232R USB-Serial bridge chip.
USB2-F-6001 adapter contains a small internal electronic circuit board
which utilises the FTDI FT232R, mounted inside a rugged plastic enclosure
capable of withstanding industrial temperature ranges. The integrated electronics
also include RS422 level shifters and TXD/RXD LEDs to provide a visual
indication of data traffic through the adapter.
mounting allows the USB2-F-6001 to be used in a variety of applications,
from a portable adapter to accompany a laptop to permanent installations
in industrial, commercial and retail locations.
enclosure incorporates a standard USB-B client connector for connection
to an upstream host or hub port. RS422-level signals, are available
on an industry-standard DE-9P connector. The maximum RS422-level
data rate is 3Mbps.
USB2-F-6001 adapter require USB device drivers, available free from http://www.easysync-ltd.com,
which are used to make the USB2-F-6001 appear as a Virtual COM Port (VCP).
This allows existing serial communications software, such as HyperTerminal,
to exchange data through the USB2-F-6001 to a legacy RS422 peripheral device.
Adds one RS422 serial port by connecting to USB
Easy plug & play installation and RS-422 device connection
Works with USB 1.1 & 2.0 Host and Hub ports
Industry Standard FTDI chip set & device drivers for maximum compatibility
Microsoft Windows® WHQL-certified, Mac OS X, Linux and Windows CE device
Installs as a standard Windows COM port
COM Port Number assignment is configurable
Supports Windows Server 2008, 2003, Vista, XP, 2000, Linux, Mac OS X
FIFO: 128 byte transmit buffer, 256 byte receive buffer
RS-422 data signals: TxD+, TxD-, RxD+, RxD-, RTS+, RTS-, CTS+, CTS-, GND
Powered by USB port. No external power adapter required.
Serial port speed up to 3Mbps
Serial Communication Parameters
o Parity: None, Even, Odd
o Data bits: 7, 8
o Flow control: RTS/CTS , X-ON/X-OFF, None
One DE-9P male connector
LEDs indicate USB Enumeration, RxD, TxD for monitoring port status &
High-temperature plastic enclosure
Operating temperature of -40°C to +85°C
USB cable of 0.9 meter included
Do you need additional support on this product?
You can't find the information you need in the documentation?
You have upgraded your operating system, and the current CD doesn't cover
You have lost your CD?
You need a list of the Operating Systems this product will operate with?
(Covers virtually everything).
Any questions not covered in the above list?
please click here.