Prices
| Support
The
U451 USB interface - US Shipping only
Please
note that by adding this item to your cart shipping will be to United States
only. If you want this shipped outside US, please go to:
USBmicro's
U451 USB Interface -WW
For
Conditions of Sale on the U4x1 products including Delivery details please
read: Conditions of Sale
The
USBmicro U451 USB Relay Interface
The
U451 is a USB solution that is pre-built, pre-programmed, and pre-tested
and will get you interfacing your PC (Win/Linux) or Mac (OSX) to various
devices in very little time! There is no USB device assembly, no driver
development, and no firmware to write. Demo software applications can be
used "right out of the box".
Features
of the U451 USB Relay Interface
-
Two Form-C relays, 125 volt, 10 amp
-
Six 500mA switch-to-ground outputs on J4
-
Firmware functions compatible with U401/U421
-
U401/U421 Port 0 functions available on J1
-
USB Interface to PC
-
Uses HID Drivers Inherent in OS
-
SPI Master and Slave Communication
-
Stepper motor control
-
1-Wire Communication Interface
-
Flexible Pin Use
-
Free Compiled Sample Applications
-
Visual Basic, C, Delphi Example Code Available
-
Fully Assembled and Tested
-
Great Replacement for Parallel Port Interfacing
-
PC's USB Power Brought to Device
-
USB Cable Provided
-
Available in Lead-Free for Europe
Overview
of the U451 USB Interface
The
U451 provides a simple digital i/o interface for the PC (Win/Linux) or
Mac (OSX) . Two relays, six transistor outputs, and eight i/o lines from
the microcontroller are provided. Commands can be sent to the U451 that
change the eight i/o lines from input to output. I/o lines can be individually
selected as inputs or outputs. The U451 supports commands to read the ports,
and if the ports are set to output, to write to the ports.
The
U451 has all of the firmware features of the U401 and U421.
The
U451 is an assembled and tested circuit card that is 2.8125 inches (72mm)
long and 1.625 inches (47mm) wide. The U451 has 5 mounting holes.
The
U451 interfaces to the PC (Win/Linux) or Mac (OSX) via the USB port. An
application on the PC (Win/Linux) or Mac (OSX) controls the U451. The U421
does not use any custom drivers, just the drivers that are a part of the
operating system. Custom software can be developed to use the U451, or
the applications that have been created as examples here can also be used.
Uses
for the U451 USB Relay Interface
With
the U451 you can utilize the USB port on your computer to interface to
various electronic devices, such as: lights, LCD displays, SPI analog and
memory devices, switches, relays, tethered robots, model railroad control,
and many custom circuits.
See
the ODN
U4x1 Application Notes section for examples of using the U451.
Please
note that by adding this item to your cart shipping will be to United States
only. If you want this shipped outside US, please go to:
USBmicro's
U451 USB Interface -WW
Support:
1)
Do you need additional support on this product?
2)
You can't find the information you need in the documentation?
3)
You need additional examples, and data?
4)
Any questions not covered in the above list?
Then
please click here.
Back
To Top
