Product:
16862
Prices
| Support
Wireless-8
!
UHF
Wireless module for remote control and data acquisition.
4
analog (12 bit, 0-5v) / digital inputs4 open collector digital outputs.Adjustable,
frequency, bandwidth and power.Maximum power 1dBmRange: 200M line-of-sight.FM
transceiver available in license-free in 433 MHz Band or 900MHz band.Open
communication protocol with configurable center frequency / channel.
The
Wireless-8 is a remote IO module linked via an FM transceiver.The Wireless-8
can either be a master-transceiver when plugged into a USB port, or a remote
slave,
will
also work as a USB connected transceiver for HOPE-RF HM-TR modules in custom
applications.
The
most basic system has one master and one slave.
There
is no limit on the number of slaves in a system.
User
Manual version 1.0 updated 23-July-2009
Software:
Wireless-8
Config version 1.1
DotNET
application for configuring and testing Wireless-8
HM-TR
Setup utility version 1.0
DotNET
application (Requires MS DotNET runtime)
Can
program the HM_TR transceivers from any comport.
USB
power supply:
When
the Wireless-8 is powered externally, it is getting 5 volts and there is
no problem, however if powered by USB only, anything less than 4.8 volts
or so, the transciever will not power up. The Wireless-8 requires external
power, or good USB power.
Support:
If
you need additional support on the above product, and you can't find the
information you need in the documentation, then please contact support
at the address below:
Support
Forum:
http://www.freewebs.com/tctec/forum.htm
This
product is from: TCTEC Pty Ltd
sales
AT emx.net.au
Richard
van Wyk
Back
To Top
